Embedded Files
為什麼需要購買人體工學螢幕支架 ?
為什麼需要購買人體工學螢幕支架 ?
1. 一個可以隨意調整顯示器高度、角度及前後位置的螢幕支撐架，可以改善使用者的使用姿勢，使頸椎、視距、坐姿皆處於最健康舒適的狀態。
2. 氣壓平衡式的螢幕支撐架擁有相當滑順、無段高度的調整功能，還可以讓您將顯示器自由旋轉為橫向或直向瀏覽。
3. 螢幕支架將顯示器懸空，沒有了底座可以釋放出寶貴的桌面空間。
4. 如果您有一個可調節高度的辦公桌，您需要能夠將顯示器調整到最佳瀏覽位置，無論是站立還是坐著。根據您的工作站設置，您可能會發現在從站立到坐下再向後移動時，需要對顯示器稍微調整一下。我們的螢幕支架具有平滑的調整手感，可以輕鬆調整顯示器的角度、高度及深度。
88911 單螢幕支撐架
88911 單螢幕支撐架
Specification:
• Weight Capacity: 4~9 kg)
• Tilt: 35° up and 25° down (display) & 45° up and 20° down (arm)
• Rotation: 180° for portrait or landscape viewing (right & left)
• Material: High quality aluminum alloy
• Mounting Option: Extended Model (Clamp Type)
• Pivot: 360°" 360°" 360°(desk" arm" display)
• Extension: 73~480mm
• Lift: 420mm
• Display Compatibility: VESA75/100mm
88915 Double/Dual Monitor Arm
88915 Double/Dual Monitor Arm
Specification:
- Weight Capacity: 8~15 kg (17.6~33 lbs)
- Tilt: 55° up and 55° down (display) & 45° up and 20° down (arm)
- Rotation: 360° for portrait or landscape viewing
- Material: Aluminum
- Mounting Option: Clamp Type
- Pivot: 360°" 120°" 90° (desk" arm" display)
- Extension: 392mm
- Lift: 390mm
- Display Compatibility: VESA75/100mm
- For Twin Monitors
關於 康萊│螢幕支架特色
- 使用德國氣壓棒無段式調整，可靜止於任何高度及角度
- 蝴蝶式VESA孔位，可分段式組裝，好拆好更換
- 調整後，可靜止於任何高度
- 如螢幕太輕，亦有加重片附於包裝中
- 肌肉線條的造型，更自然優雅的設計
Quick and simple installation
Gas Spring integrated
Meets current ergonomic guidelines.
E2MS.18 雙軸螢幕夾
E2MS.18 雙軸螢幕夾
Specification:
- Finger touch dynamic height adjustment
- Recommended for worksurfaces 70 cm deep or less
- 26.7 cm height adjustment range
- 40 cm arm extension
- 16.5 cm arm retraction
- +45°/-50° monitor tilt
- ±90° VESA rotation
- 2kg - 7kg weight capacity (per arm)
- VESA quick release
- 180° lock-out feature
- Desk clamp mount
- Sliders provide 22.9 cm of additional horizontal adjustability
- Exceeds BIFMA x5.5 requirements
- 28.0” max. monitor width (bezel measured left to right)
特色:
- 可水平調整，確保營幕靠攏
- 不會往後撞屏風(組裝時，在前面固定止付螺絲)
- 其餘功能皆有: 轉向、快拆、傾仰及前後調整
手指觸摸動態高度調節
推薦用於70公分深或更小的工作檯面
- Exceeds BIFMA x5.5 requirements
螢幕可橫向移動
- 180° lock-out feature│不會往後轉
89321-BR Two-axis Tablet Holder
89321-BR Two-axis Tablet Holder
Specification:
- Fits tablets to the maximum 12.9 inch.
- Easily adjust tablet to the best viewing angle and position.
- Modern slim design and multiple color options.
- To hold Ipad Pro in landscape mode
- Arm length: 18.5+22+11 cm (three-section)
- Clipable table thickness: 2-4 cm
- Load: 3 kg
Freely adjustable to any position
Quick disassembly mechanism
Exquisite shape
88035 Non-VESA Monitor Conversion Bracket
88035 Non-VESA Monitor Conversion Bracket
• Features a lightweight and streamlined design
• Helps Non-VESA Monitors to be used with various mounting solutions for ergonomic benefits
• Non-VESA Monitors easily snaps into holder on the three corners for secure placement
- Weight Capacity: ~15kg (33lbs)
- Material: Plastic & Steel
- Fits size: 19”-24” Non-VESA Monitors
- Connects any VESA-compliant mounting solution with a 75 mm x 75 mm attachment
Report abuse